Menu

User Menu

user_mobilelogo

To access the lower parts of the engine you will need to remove the rear crash bar. For this you need a T45 Torx Bit (TX45).

There are six bolts which hold the bar to the rear engine frame and these are indicated with red circles in the following image. Note that the outer lower bolts also hold on the brackets to which the rear panels attach to.

When refitting the crashbar, we recommend putting a dab of copper grease on the threads of the bolts to make them easier to remove next time. Don't overtighten the bolts either.

Search fortwo 450:

Search for guides and limit results to just this section. You can also narrow results by filtering sub categories.

Keyword

Category