Spin on oil filter conversion

To do this conversion you will need a spin-on oil filter conversion, a spin-on filter, a 27mm socket, something to catch oil.

Start by removing the existing filter with a 27mm socket. Ensure that you have a tray under the car to catch the oil.

Lightly rub a small amount of oil around the rubber seal of the new adapter and screw it on as tight as you can by hand. Using a socket, give it a quarter turn more.

Lightly rub a small amount of oil around the rubber seal of the new filter and screw that on as tight as you can by hand.

Clean up any excess oil, warm the car up and check the oil level as per the car's manual, then top up the oil accordingly.