High level brake light

Click here for a full list of all the lamps on a fortwo.

Using a T15 bit, unscrew the two fixings that hold the brake light cover in place.

Pull the cover free.

The lamp cluster will pull out of the car. It is secured on the left hand side as shown:

You will see that this light is made up of 5 little filament 'bud' lamps. These are held in tightly so removal is tricky. I recommend putting a cloth over the lamp and carefully gripping it with some pliers. Ease the lamp out gently.

When refitting to the car, ensure that the fitting is the correct way up. The sides should slope inwards towards the top as shown below. Be careful not to over tighten the screws when refitting the cover.