Menu

User Menu

user_mobilelogo

Click here for a full list of all the lamps on a fortwo.

Fully open the boot and loosen the 2 plastic nuts with a 10mm hex socket.

Carefully wiggle the light cluster off the studs and remove from the car.

Remove the wiring from the back of the light cluster. In order to do this, you will need to lift up the little retaining clip indicated by the screwdriver below.

With the cluster removed, push the two clips that secure the lights onto the silver (or black) surround.

The coloured plastic front removes from the cluster body by pulling back the clip shown.

The light is now fully dismantled.

Replace the offending lamp. Remember the top lamp on each cluster is the two stage break / side light.

Reassemble the cluster and reconnect the wiring. Locate the two hooks on the side of the cluster with the holes on the tridion.

Put the cluster back into position and check that the hooks are still holding correctly before replacing the plastic nuts.

Search fortwo 450:

Search for guides and limit results to just this section. You can also narrow results by filtering sub categories.

Keyword

Category