Spin on Oil Filter Conversion...

To do this conversion you will need a spin on oil filter conversion, a spin on filter, a 27mm socket, something to catch oil.

Start by removing the existing filter with a 27mm socket. Ensure that you have a tray under the car to catch the oil.

Lightly rub a small amount of oil around the rubber seal of the new adapter and screw it on as tight as you can by hand, using a socket give it a quarter turn more.

Lightly rub a small amount of oil around the rubber seal of the new filter and screw that on as tight as you can by hand.

Clean up any excess oil, warm the car up and check the oil level as per manual, top up the oil accordingly.