Rear Boot Lock...

A lock in some areas is an invitation for someone to stick something in it. Roadsters don't seem to have this problem as they have a cover over the lock face.

A wiring grommet covers the rear lock up nicely, by trimming the back off the grommet so it sits flush on the lock face. With a tiny amount of glue will hold it to the lock tight.

*** Be very careful not to get any glue in the lock itself ***

If you ever need to use the lock just peel it off.

It also gives a nice finish to the rear of the car, you have a choice of two different sizes depending on the look you want.

24mm grommet: Picture 1

30mm grommet: Picture 2