|
The following layout is for a four button triangle. For single and two button triangles, see bottom of page.
Click on the picture to make larger. LED orientation is shown with a triangle pointing to the cut-out on the negative side of the LED. Observe correct polarity when soldering.
| No. |
Type |
OEM Colour |
Function |
| 1 |
PLCC-2 |
Warm White |
Key Icon |
| 2 |
PLCC-2 |
Red |
Car lock status |
| 3 |
PLCC-2 |
Red |
Hazard light button |
| 4 |
PLCC-2 |
Warm White |
Button backlights |
| 5 |
PLCC-2 |
Orange |
Rear window heater status |
| 6 |
PLCC-2 |
Red |
Heated seats low temp status |
| 7 |
PLCC-2 |
Red |
Heated seats high temp status |
| 8 |
PLCC-2 |
Red |
Aircon low power status |
| 9 |
PLCC-2 |
Red |
Aircon high power status |
| 10 |
509T |
Warm White |
Sliders backlight |
Note: Single and two button triangles still require 4 backlight LEDs even though some positions are redundant. You will need to replace these as well to ensure correct voltage across all LEDs.
|
