Click here for a list of all the lamps on a Roadster.

All the graphics for the fan / heater selector switches are illuminated from 1 509T 1.1W lamp. This is held in the 'safety triangle' on top.

Pop out the triangle by gently levering it from the front.

Disconnect the wiring and remove the section from the car.

There are four T8 screws which hold the back plate on. Remove these and take off the back plate to reveal the PCB.

Unscrew the lamp and replace it with a new one.

p>

Note: If you are replacing with an LED, ensure that you observe correct polarity.