Fitting the Michalak Ferrari grill...

When fitting this grill the first thing you need to do is remove the old one, to do this follow the guide here: removing the front grill.

Once the old grill has been removed you will see two Torx T25 screws (one either side). Remove these as this will be the new mounting point for the replacement.

Place the old Torx T25 screw through the bracket and into the panel.

With the new grill you should receive the new fixings (shown below).

Slide the black 'U' clip over the bracket to provide a face to be screwed into.

Place the new grill where it needs to be, using the provided screws secure the grill to the car.